Two-level optimal output feedback stabilizer design

The paper addresses the design of two-level power system stabilizers using an optimal reduced order model whose state variables are torque angles and speeds. The reduced order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interactions. The effectiveness of this controller is evaluated and a multimachine system is given as an example to illustrate the advantages of the proposed method. Responses of the system with a two-level scheme and an optimal reduced order scheme are included for comparative analysis.     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

基于小波基优化和动态比特分配的数字音频压缩编码方案

提出了一种新颖的基于自适应小波基优化选择和心理声学模型相结合的数字音频信号的透明质量编码方法，保证固定失真水平上使每帧信号的变换系数的动态分配的比特数最少，并且利用动态码本的方法来消除音频信号的统计冗余，进一步压缩比特率，对于抽样率为４４．１ｋＨｚ每样值用１６比特线性码表示的光盘单声道音乐信号可以压缩到６４ｋＢＰＳ左右。     

Effects of organic farming on minerals contents and aroma composition of Clemenules mandarin juice

Consumers demand organic products because they believe that the organic products are more flavorful and respectful to the environment and human health. The effects of organic farming on the minerals contents and aroma composition of Clemenules mandarin juices were studied. Minerals (Fe, Cu, Mn, Zn, Ca, Mg, K, and Na) were quantified using atomic absorption-emission spectroscopy, while volatile compounds were extracted using the dynamic headspace technique and were identified and quantified by GC–MS. In general, organic farming produced a mandarin juice with a higher quality than that produced by conventional agricultural practices. Higher concentrations of both minerals and positive volatile compounds were found in the organic juice, while the formation of off-flavors was higher in the conventional juice, although threshold values were not reached.     

基于图像数据库的动态场景生成系统

实现各类目标和背景下动态场景的计算机编辑和生成，首先应对组成动态场景的要素进行分析，即目标，目标运动规律和特殊事件四个要素，然后通过编程由四个模块完成相应功能。目标，背景编辑模块可对目标，背景图像进行各种处理，并对重要特征量进行计算，运动路径模块可指定目标的运行规律，包括路线，大小和角度变化等。特殊事件模块可加入独立目标的各类典型事件，如运动的干扰物等。最后通过动态场景合成由计算机自动生成所需的动态场景图像。所需的原始目标，背景图像来源于图像数据库管理系统，通过索引项可便携地找到。     

高速铣削的非线性建模

当铣削速度提高到常规速度的5～10倍后,铣削过程将变得十分复杂.为此从动力学出发,利用切削理论和数值方法,建立了一个高速铣削的非线性动力学模型.其铣削力模型包括了铣刀的几何特征、铣削力和动态铣削力计算,以及系统动力学方程.并利用吉尔数值法编写了求解程序,程序具有自动变阶和调整步长的特点.利用该模型,可对铣削过程的特征参数如稳定性、切削力等进行预测.     

分布式制造动态调度资源集成系统建模

本文分析了分布式制造动态调度的本质，提出了对分布式制造资源集成系统的要求，并利用多A-gent理论对分布式制造资源集成系统进行建模，给出了系统集成的拓扑图和说明系统的信息流动过程，解决了构造分布式制造动态调度资源集成系统的理论基础。     

分散网络制造浅谈

网络社会的制造业将是一个全球化的分散型的制造体系.分散网络制造是基于互联网的制造活动,因此,它具开放的、虚拟的,以及资源和技术更合理配置的特点.其组织模式是多种多样的,按现今国防工业现状,宜采用项目领导小组统一协调和控制下的分阶段动态联盟更为合适.为此,分析了网络无序化、企业属性知识不足、利益分配不易等问题带来的困难,并提出了一些建议.     

动态聚焦电子枪的模拟与实验研究

动态聚焦技术是为了满足大屏幕高分辨率彩色显像管及高分辨率彩色显示管的发展需求而产生的一项新技术。在本文中，作者首先提出了一种动态聚焦电子枪结构，进行了数值计算与分析，制作了动态聚焦电子枪并装管实验。通过对实验样管的测试与分析。证实该枪性能良好，动态聚集效果明显。